
NMEA Magnetic Heading Data Output Unit
Cassens & Plath NETcourse converts magnetic compass heading into digital data for compatible onboard equipment. Using the CP/102B azimuth sensor, the system provides heading output through RS422 and RS485 interfaces, supporting the integration of a magnetic compass into electronic navigation systems. A two-line display, configurable transmission rates, and automatic main-to-emergency power changeover support onboard operation.
Key Benefits
Digital magnetic heading output via RS422 and RS485.
IEC 61162-1 and IEC 61162-2 data output formats.
Selectable transmission rates of 1, 10, or 30 updates per second.
Accuracy stated as better than ±0.5°.
Point-to-point heading transmission error correction.
Automatic sensor checks for detachment and interfering magnetic fields.
Main and emergency 24 VDC inputs with automatic changeover.
MED type approval in specified REFLECTA system combinations.
Magnetic Heading Integration
The CP/102B sensor detects the magnetic compass heading and supplies it to the NETcourse control unit for digital transmission. Heading data is output using HDG or HDM sentences, allowing connection to equipment that accepts the corresponding protocol and electrical interface. Output rates of 1 or 10 updates per second use 4,800 baud, while 30 updates per second use 38,400 baud.
Operation and Monitoring
A dimmable two-line display provides access to menu settings. A point-to-point correction routine supports heading transmission adjustment, while automatic checks monitor sensor detachment and magnetic interference. Power-failure alarms indicate loss of the main or emergency supply, and automatic changeover supports continued operation when an alternative supply remains available.
Installation and System Configuration
NETcourse is supplied with an azimuth sensor, control unit, junction box, and the cables. The standard sensor-to-control-unit cable is 15 m, with a stated maximum length of 40 m. The magnetic compass and binnacle are not included. Sensor mounting adapters, a USB heading-data cable, and a 230 VAC-to-24 VDC power converter are listed separately.
Approvals
MED type approval for NETcourse in combination with the following magnetic compass systems:
REFLECTA/1 with TYPE/11.
REFLECTA/2 with TYPE/12.
REFLECTA/3 with TYPE/21.
NMEA Magnetic Heading Data Output Unit
Cassens & Plath NETcourse converts magnetic compass heading into digital data for compatible onboard equipment. Using the CP/102B azimuth sensor, the system provides heading output through RS422 and RS485 interfaces, supporting the integration of a magnetic compass into electronic navigation systems. A two-line display, configurable transmission rates, and automatic main-to-emergency power changeover support onboard operation.
Key Benefits
Digital magnetic heading output via RS422 and RS485.
IEC 61162-1 and IEC 61162-2 data output formats.
Selectable transmission rates of 1, 10, or 30 updates per second.
Accuracy stated as better than ±0.5°.
Point-to-point heading transmission error correction.
Automatic sensor checks for detachment and interfering magnetic fields.
Main and emergency 24 VDC inputs with automatic changeover.
MED type approval in specified REFLECTA system combinations.
Magnetic Heading Integration
The CP/102B sensor detects the magnetic compass heading and supplies it to the NETcourse control unit for digital transmission. Heading data is output using HDG or HDM sentences, allowing connection to equipment that accepts the corresponding protocol and electrical interface. Output rates of 1 or 10 updates per second use 4,800 baud, while 30 updates per second use 38,400 baud.
Operation and Monitoring
A dimmable two-line display provides access to menu settings. A point-to-point correction routine supports heading transmission adjustment, while automatic checks monitor sensor detachment and magnetic interference. Power-failure alarms indicate loss of the main or emergency supply, and automatic changeover supports continued operation when an alternative supply remains available.
Installation and System Configuration
NETcourse is supplied with an azimuth sensor, control unit, junction box, and the cables. The standard sensor-to-control-unit cable is 15 m, with a stated maximum length of 40 m. The magnetic compass and binnacle are not included. Sensor mounting adapters, a USB heading-data cable, and a 230 VAC-to-24 VDC power converter are listed separately.
Approvals
MED type approval for NETcourse in combination with the following magnetic compass systems:
REFLECTA/1 with TYPE/11.
REFLECTA/2 with TYPE/12.
REFLECTA/3 with TYPE/21.