mobile background

Home  >  Brand  >  CassensPlath

REFLECTA Series

c1122e187926b.png

e6f6bc31c2875.png


Magnetic Reflector Compass Systems

The Cassens & Plath REFLECTA Series combines magnetic heading indication, bearing-taking capability, and optical heading readout in a configurable compass binnacle system. Designed for worldwide navigation, REFLECTA/1, REFLECTA/2, and REFLECTA/3 offer different compass sizes and optical arrangements to suit the vesselโ€™s wheelhouse layout. Each system includes a magnetic reflector compass, an azimuth device, deviation correctors, and normal and emergency illumination.


Key Benefits

  • Optical heading readout at the helmsmanโ€™s position.

  • Bearing-taking capability with the supplied azimuth device.

  • Choice of 180 mm or 160 mm compass cards.

  • Vertical reflection tubes or horizontal optical by-pass arrangements.

  • Aluminium-magnesium alloy binnacle with seawater-resistant fittings.

  • Normal and emergency lighting.

  • Configurable binnacle heights to meet installation requirements.

Optical Heading Readout

The REFLECTA Series uses lenses and mirrors to relay the compass heading to the helmsmanโ€™s position inside the wheelhouse. A rotatable mirror head with day and night mirrors supports heading observation. Where the steering position is not directly below the compass binnacle, a horizontal optical by-pass can be configured to suit the bridge layout.


Magnetic Compass and Bearing Capability

Each model incorporates a magnetic reflector compass with 1ยฐ card graduations and a graduated ring for taking bearings. The supplied azimuth device includes sighting vanes, a black mirror, and a shadow pin. REFLECTA/1 and REFLECTA/2 feature 180 mm compass cards, while REFLECTA/3 provides a smaller 160 mm configuration.


Marine Construction and Installation Flexibility

The aluminium-magnesium alloy binnacle is fitted with seawater-resistant components and access flaps for the lighting, reflection optics, and corrector compartments. Binnacle height and optical routing can be selected to suit the vesselโ€™s installation requirements. Deviation correction equipment includes B+C magnets, D-spheres, and heeling correction magnets. The Flinders bar is supplied separately and is identified in the brochures as required for worldwide operation.


Available Models

  • REFLECTA/1 โ€” Standard configuration with a 180 mm compass card for vertical or short horizontal optical arrangements.

  • REFLECTA/2 โ€” Designed for extended optical paths and horizontal by-passes longer than 2 m.

  • REFLECTA/3 โ€” Smaller configuration with a 160 mm compass card and a lower standard card height.